1. "Ten Prohibitions" for work at heights

1. People with high blood pressure, heart disease, anemia, epilepsy, deep myopia and other diseases are not allowed to climb high.

2. No climbing is allowed without supervision.

3. It is not allowed to climb high without wearing a helmet, wearing a seat belt, or tightening the trousers.

4. The work site is not allowed to climb high due to strong winds, heavy rains, heavy snow, and heavy fog above level 6.

5. No climbing is allowed if the scaffolding and springboard are not strong.

6. The ladder has no anti-slip measures, and no anti-slip shoes are not allowed to climb.

7. It is not allowed to climb the derrick, gantry, and scaffold, and it is not allowed to climb the height by using non-manned vertical transportation equipment.

8. It is not allowed to climb high when carrying bulky objects.

9. No ascending is allowed near the high-voltage line without obstruction.

10. It is not allowed to climb high due to insufficient light.

2. "Ten Prohibitions" for Construction Safety

1. It is not allowed to climb up or down on scaffolding or sitting on a hanging basket.

2. High heels, slippers, hard-soled shoes and barefoot construction are not allowed.

3. It is not allowed to chase, play and make noise in the frame.

4. Drunk work and construction with diseases are not allowed.

5. Non-mechanic workers are not allowed to start the machine arbitrarily.

6. Non-electricians are not allowed to lap wires.

7. It is not allowed to overload and load on the outer frame and floor.

8. It is not allowed to throw objects and parabolas on it.

9. Personnel under the age of 16 are not allowed to work on the construction site.

10. Do not violate any safety construction discipline and regulations.

3. "Ten Prohibitions" on the Construction Site

1. Do not wear a safety helmet and are not allowed to enter the scene.

2. Drinking and bringing children are not allowed to enter the scene.

3. People are not allowed in vertical transportation such as derricks.

4. It is not allowed to wear slippers, high heels and hard-soled shoes to work.

5. Templates and perishable materials are not allowed to be used as scaffolds, and no trouble is allowed during operation.

6. The power switch is not allowed to have multiple functions at one gate, and untrained workers are not allowed to operate machinery.

7. No high-altitude operations are allowed without protective measures.

8. The hoisting equipment is not allowed to be hoisted without inspection (or test hoisting), and no people are allowed to stand underneath.

9. Smoking is not allowed in woodworking yards and fire prohibited areas.

10. Various materials on the construction site should be sorted and stacked neatly to achieve civilized construction.

4. "Ten Prohibitions" for Safe Driving

1. Driving under the influence of alcohol is not allowed.

2. Private use of public buses is not allowed, and it is strictly forbidden for vehicles to not return to their positions or park in disorder after completion of the task.

3. Overloading, speeding, and overcrowding are not allowed.

4. The vehicle is not allowed to be driven by others.

5. It is not allowed to leave the car with a fault.

6. It is forbidden to let the car or speed, or occupy the road.

7. It is not allowed to wear slippers, vests and shorts to drive vehicles.

8. It is not allowed (in foggy days) not to ask for instructions in advance to drive the vehicle on a risky basis.

9. It is not allowed to chat with the passengers or do things that have nothing to do with work.

10. Forced overtaking, lane change and overtaking in prosperous areas are not allowed.

5. "Ten Prohibitions" for Electric Welding and Gas Cutting

1. No special operation certificate, no welding or cutting.

2. There are no reliable safety measures for rainy and open-air operations, no welding or cutting.

3. Containers containing flammable, explosive and hazardous materials have not been thoroughly cleaned, tested for flammable concentration, and shall not be welded or cut.

4. Working in the container, there is no 12 volt low voltage lighting and poor ventilation, no welding, no cutting.

5. There is no power failure in the equipment, no pressure relief, no welding or cutting.

6. There are flammable and explosive materials around the work area that have not been cleaned up, no welding or cutting.

7. The nature of the welded body is unclear, the direction of sparks is unknown, no welding, no cutting.

8. Equipment safety accessories are incomplete or invalid, no welding or cutting.

9. There is no special person monitoring, no protective measures, no welding, no cutting in the boiler, container and other equipment.

10. No safety measures, no hot-fire procedures, no welding or cutting in the no-fire zone.

6. Lifting operations "ten no hanging"

1. Do not hang if the load exceeds the rated load.

2. The command signal is unknown, the weight is unknown, and the light is dim.

3. The sling and accessories are not tied tightly and do not meet the safety requirements.

4. The heavy objects are directly processed by crane without lifting.

5. Hanging slantingly without hanging.

6. Do not hang if there are people or objects floating on the workpiece.

7. Do not hang explosive objects such as oxygen cylinders.

8. The notch with corners and corners is not fully finished and not hung.

9. Do not hang objects buried in the ground.

10. Do not suspend command in violation of regulations.

7. "Ten Prohibitions" for Electrical Safety

1. Unlicensed electricians are not allowed to install electrical equipment.

2. No one is allowed to play with electrical equipment and switches.

3. It is not allowed to use electrical equipment with damaged insulation.

4. It is not allowed to use electric heating equipment and light bulbs for heating.

5. No one is allowed to start electrical equipment with warning signs and unplug fuses.

6. It is not allowed to rinse or wipe electrical equipment with water.

7. When the fuse is blown, it is not allowed to exchange the fuse with inconsistent capacity.

8. It is not allowed to pile and move the soil without going through any formalities where cables are buried.

9. When someone gets an electric shock, they should cut off the power immediately, and no one is allowed to touch the electric shock before leaving the power source.

10. Do not touch lightning arresters and lightning rods during lightning.

8. "Ten Prohibitions" for Underground Electricity

1. It is forbidden to get rid of the non-voltage release and over-current protection.

2. Do not throw off the leakage relay.

3. It is not allowed to throw off the comprehensive protection device of coal electric drill.

4. It is forbidden to get rid of the wind, electricity, and gas blocking devices of the local ventilators.

5. Open flame operation, open flame management, and open flame shooting are not allowed.

6. It is not allowed to use copper, aluminum, iron wire, etc. instead of fuses.

7. The working face where the wind or power is cut off, the power is not allowed to be sent without gas inspection.

8. The use of electrical equipment that has failed to explode is not allowed.

9. It is not allowed to beat, hit or disassemble the miner's lamp in the underground.

10. Maintenance and relocation of electrical equipment are not allowed to live on.

Nine, construction quality "ten inaccurate"

1. Strictly construct according to the drawings, and are not allowed to change randomly.

2. Each part of the project shall be submitted before the shift, and construction without a report is not allowed.

3. Each sub-project must implement self-inspection, mutual inspection, and random inspection. Those who fail to pass are not allowed to enter the next process.

4. During the construction of the main concealed projects, the constructors must supervise on-site and are not allowed to leave casually.

5. Unqualified materials are not allowed to be transported into the construction site for use.

6. Sand and gravel are not allowed to be used without being sieved and washed.

7. Building materials such as cement, steel, bricks, etc., are not allowed to be used without testing or testing.

8. Strict material mixing ratio, no measurement at the construction site.

9. During concrete construction, walking or carts are not allowed on the steel bars.

10. It is not allowed to violate the safety operation regulations, and those who do not have any labor protection are not allowed to enter the construction site.

10. “Ten Prohibitions” for Safe Use of Electricity

1. Drilling wells under high-voltage wires is not allowed to prevent user deaths caused by well pipes hitting high-voltage wires.

2. It is not allowed to build houses, plant trees, plant vine crops and pile firewood under the wires to prevent fire and personal electric shock.

3. It is forbidden to pick up broken wires and dismantle and cut pull wires and ground wires to prevent electric shock.

4. It is not allowed to dig pits under the poles to take soil and tie livestock to the poles to prevent the poles from breaking and even humans and animals getting electric shocks.

5. It is not allowed to go on the transformer platform, creepage pole, pull wire, and prevent electric shock.

6. It is forbidden to fly kites under the wires, take out birds on the poles, throw stones on the transformers, the wires and porcelain bottles, and hit the birds with bombs to prevent damage to electrical equipment and electric shocks.

7. It is not allowed to hang all kinds of ironware, furniture, dried vegetables and other items on the wires, especially the iron wire for clothes drying should be kept away from the wires to prevent electric injuries when the wires are worn.

8. Sweeping whips under overhead lines is not allowed, members do not touch the wires when wiping the house, and do not touch the pull lines when the tractor is plowed to prevent electric shock.

9. It is not allowed to connect electric lights and other electrical equipment privately, villagers apply for electricity, and find an electrician for installation and repair.

10. It is forbidden to set up power grids privately and use electricity for fishing, to prevent all electricity theft, and to hold accountable for offenders.

11. "Ten Prohibitions" on Fire Prevention in Dormitories

1. It is forbidden to pull wires indiscriminately.

2. It is forbidden to stay in bed to smoke or throw cigarette butts.

3. It is not allowed to occupy or block the fire-fighting passage.

4. It is not allowed to burn sundries in the dormitory and building.

5. It is not allowed to carry flammable and explosive materials into the house.

6. The use of high-power electrical appliances is not allowed.

7. Open flame appliances such as alcohol stoves are not allowed.

8. It is not allowed to modify the electrical wiring and power supply equipment without authorization.

9. You are not allowed to leave the dormitory without turning off the power supply.

10. It is forbidden to intentionally damage fire-extinguishing appliances and fire-fighting equipment.

12. “Ten Prohibitions” for Factory Vehicle Operation

1. Driving without a license is prohibited.

2. It is not allowed to work with sick vehicles.

3. No night work is allowed when the headlights fail.

4. Drunk driving is not allowed.

5. Continuous driving with one-handed mop is not allowed.

6. Super wide, super long, super high, and overweight are not allowed to load cargo.

7. On the roads of the factory, the driving speed is not allowed to exceed 5km/h.

8. It is forbidden to leave the vehicle without removing the key.

9. Fatigue driving is not allowed.

10. It is not allowed to make a sudden stop, make a sharp turn or overtake without turning on the turn signal or honking the whistle